Why Choose Us
 
 

Rich Experience

Our company established in 2005, and has nearly 20 years experience in manufacturing power sprayers.We possess a high quality scientific research staffs already and a set of perfect quality certification systems.

 
 
 

Reliable Quality

In order to guarantee and offer the high quality and suitable price products and service continually, we insist on making 5% sale income investment in research and development field.

 
 
 

Global Shipping

The products sell well in the domestic market, and find a good sale in more than 30 countries and regions, such as Southeast Asia, The middle-east, Africa, Europe and America etc., we receive good evaluation from the users.

 

 

Overview of Agriculture Power Sprayer

 

 

An agriculture power sprayer is a specialized equipment used in agriculture for spraying pesticides, herbicides, fungicides, and fertilizers onto crops. It consists of a tank to hold the chemical solution, a pump to pressurize the solution, a spray nozzle or boom to disperse the solution, and often includes a power source such as an engine or a motor to drive the pump.

 

productcate-500-350
 
Advantages Of Agriculture Power Sprayer
 

Lower Cost

Electric sprayers are generally simpler, have fewer parts, and are much cheaper than gas-powered sprayers. Typically, the pump and motor are one unit, which is cheaper (compared to gas power) and requires no extra assembly, saving labor and assembly costs.

 

Less Space

Electric power sprayers usually take up less space. The electric pump and engine are usually slightly smaller than the engine and fuel pump assembly.

 

Less Maintenance

Electric sprayers have fewer moving parts and often have simpler plumbing. This means fewer defects, fewer parts to keep in stock, and easier maintenance.

 

Quieter

The electric motor makes almost no noise unlike a gas-powered sprayer which can be quite noisy. This can allow operators to operate earlier and later in the day without disturbing customers and neighbours.

 

Product Specification

 

We offer the following Product specifications:

Name

Direct Link Power Sprayer

Model

HS-J32

Working Pressure(Mpa)

4

Flow(L/min)

43

R.P.M

900

Power(Hp)

170F(7.5Hp)

N.W/G.W(Kgs)

33/35

Carton Dimension(cm)

U-shaped:635x415x420

590x430x420

Plunger Material

Ceramic

Hard chrome-plated

Dia(mm)

ø32

 

Name

Direct-acting Plunger Pump Power Sprayer

Model

HS-J28M

Working Pressure(Mpa)

2-4

Flow(L/min)

23.5

R.P.M

800

Power(Hp)

2.2

N.W/G.W(Kgs)

37/38

Carton Dimension(cm)

630*405*340

Plunger Material

Ceramic

Dia(mm)

ø28

 

 
 
Application of Agriculture Power Sprayers
01.

Agriculture

From crop spraying to orchard and vineyard maintenance, the Grease-Free Power Sprayer ensures efficient and reliable pesticide or fertilizer distribution in agricultural settings.

02.

Fire Protection Systems

The pumps are employed in fire protection systems to provide high-pressure water flow for firefighting and emergency rescue purposes.

03.

Chemical Industry

The pumps are suitable for liquid transfer, mixing, and spraying processes in the chemical industry.

04.

Oil and Gas Sector

The pumps find application in the oil and gas industry for injecting and extracting liquids, boosting, and conveying mediums.

 

Precautions for use of Agriculture Power Sprayer

Many pesticides cause rapid corrosion of metal components in a spraying system. Pesticides should be washed from the whole system immediately after use. Cleaning a sprayer thoroughly not only increases its life but also reduces the chance of cross contamination of chemicals and prevents crop injury. In the case of wettable powders, cleaning prevents settling and caking which may be difficult to remove once the chemical has dried.

 

Always end the day with an empty tank. When using the same chemical the next day, flushing the sprayer with clean water is sufficient. Always flush the sprayer onto a site listed on the pesticide label. If a different pesticide will be used, a more effective cleaning is necessary. The cleaning solution will depend on the type of pesticide. Always check the pesticide label for specific cleaning instructions.

 

After cleaning, remove the nozzles and flush the system twice with clean water. Clean nozzles and screens in a strong detergent solution or kerosene, using a soft brush. Use chemical-resistance gloves for your protection.

 

The sprayer should be protected from deterioration during the storage period. Use automotive antifreeze with a rust inhibitor. This not only protects against corrosion but will reduce freezing in case all the water was not drained. Seal off any openings to prevent entry of dirt, debris or insects. Store the sprayer in a place secure from damage from other equipment or livestock. Make a list of all parts in need of replacement and order them well in advance of the next spray season.

productcate-500-500
 

 

Certificates

productcate-1-1
productcate-1-1
productcate-1-1
productcate-1-1
productcate-1-1

 

FAQ

Q: What is the power required for power sprayer?

A: It can be powered by a 3 HP engine or electric motor . It is convenient to spray with 4 to 6 spray lances at a time using the sprayer. There are sprayers can be operated by tractor PTO as well as by a power tiller..

Q: What are the uses of power sprayer in agriculture?

A: An agricultural crop sprayer is the equipment used for applying liquid substances to plants or crops. These substances could be fertilisers, herbicides, or pesticides – all of which are important for the maintenance of crop health during the crop growth cycle.

Q: What is the working principle of power sprayer?

A: Conversion of spray liquid into droplets is achieved using some form of energies. Various forms of kinetic energies such as hydraulic, gaseous and centrifugal are utilized in this process. The type of sprayer and nozzles or atomizers can be classified according to the energy used.

Q: What is the rotating speed of an agitator in a power sprayer?

A: Agitators are needed to agitate the liquid of the tank. Horizontal shaft may be used with flat blades rotating at about 100-200 rev/min. Paddle tip speeds in excess of 2.5 m/sec may cause foaming.

Q: Which oil is used in power sprayer?

A: SAE 10W-30 oil, very versatile and suitable for different weather conditions.

Q: Which part of power sprayer is used to prevent corrosion?

A: (i) Prime mover - Prime mover is needed to supply power to the power sprayer. It is usually combustion engine. The power generally varies from 1 to 5 HP. (ii) Tank - Steel tank is widely used to prevent corrosion.

As one of the most professional agriculture power sprayer manufacturers in China, we're featured by quality products and low price. Please rest assured to buy agriculture power sprayer for sale here and get quotation from our factory. Contact us for customized service.

Power Sprayer Agricultural Plunger Pump, Agricultural Power Sprayer Piston Pump, HTP Sprayer Pump

Shopping Bags