Knowledge

The method of adjusting the pressure of the spraying three-cylinder plunger pump is as follows: 1. There is a nut at the small plastic cap hexagonal screw at the pump head position of the spraying thr

Lubrication and maintenance of the spraying plunger pump are very critical. Choosing the right lubricant is an important step to ensure the efficient operation of the equipment. For the sprayer pump h

When working, under the action of the cam and plunger spring on the camshaft of the fuel injection pump, the plunger is forced to reciprocate up and down, and then the oil pumping task is completed

Piston pump is an important component in the hydraulic system, especially in metallurgical equipment, most of the energy components of the hydraulic system are piston pumps.

Axial piston pump is a piston pump with the reciprocating motion direction of the piston or plunger parallel to the central axis of the cylinder block.

There are two reasons for the excessive heat of the piston pump, one is the friction of the machine. Since the moving appearance is in a state of dry friction or semi-dry friction

Make the type and performance of the selected piston pump meet the requirements of the process parameters such as flow, head, pressure, temperature, cavitation flow, and suction lift of the device.

The piston pump is an important piece of equipment in the hydraulic system. It relies on the plunger to reciprocate in the cylinder block, so that the volume of the sealing operation cavity changes to

An axial piston pump is a piston pump in which the reciprocating motion direction of the piston or plunger is parallel to the central axis of the cylinder block.

The oil distribution pan and the cylinder block or between the plunger and the cylinder block are seriously worn, so that the internal and external leakage is too large.

Axial piston pumps are generally composed of main parts such as cylinder block, oil distribution plate, plunger and swash plate. There are multiple plungers in the cylinder body

Improve plunger system planning. After repeated proven, the final selection of priority valve and load sensing full piston diverter, the new system can be according to the steering demand